Corpus v6 pro
“CUTTER” outside the element works or did I do something wrong?
Red Cat Answered question
Inside the element there is one plate called Cutter. It defines the shape of the cut. It can also define the CNC machining for the cut.
The cut will be transferred from the “cutter” surface to the first next surface of the same direction and angle.
The cutting direction is on the “0” side of the plate. The start and end of the influence are determined by the variables “mindist” and “maxdist”.
If mindist=100 and maxdist=200, the cut projection starts at a distance of 100mm from the board and ends at 200mm.
If mindist=-70 (negative) and maxdist=70 then the projection starts 70mm before the Cutter surface and ends 700mm after.
I did this before. what i mean is if the cutter reach the edge element the cutter doesn’t work anymore